舒凤远 [副教授]
基本情况
舒凤远，副教授，硕导，Applied Surface Science、Journal of Thermal Spray Technology、Journal of Alloys and Compounds、Surface and Coatings Technology, Materials Characterization等杂志审稿人。
联系方式
Email：shufengyuan@163.com
教育经历
2010.09-2015.01 哈尔滨工业大学 材料加工工程学科，博士
博士课题方向：厚板高强铝合金的焊接与再制造技术
2008.09-2010.07 哈尔滨工业大学 材料加工工程学科，硕士
2004.09-2008.07 哈尔滨工业大学 焊接技术与工程专业，本科
工作经历
2021.11-至今 中山大学 化学工程与技术学院，副教授
2015.04-2021.09 哈尔滨工业大学（威海），讲师、副教授
学术任职
中国机械工程学会再制造工程分会委员
中国设备管理协会再制造技术委员会委员
科研方向
激光及电弧焊接技术；增材制造技术；先进再制造技术与装备；材料腐蚀机理与防护技术
科研项目
01. 山东省重点研发计划，2019GGX102085，CoCrFeNiSiB高熵非晶覆层微秒激光近净成形关键技术研究，主持；
02. 总装预研项目，6142005180403，激光再制造FeCoCrNiBSi高熵非晶/纳米晶覆层合成原理及性能研究，子课题负责人；
03. 国家自然科学基金青年基金，51905126，高熵CoCrNiFeBSi合金非晶熔覆层脉冲激光制备原理及磨损机理，主持；
04. xxx预研基金项目重点基金，9140C850205120C85，XXXXXX，参与；
05. 山东省自然科学基金，ITFAZS0101604，基于焊接热循环的厚板Al-Zn-Mg-Cu系合金GTAW多层多道焊接过程组织演变规律及接头性能研究，主持；
06. 国家自然科学基金面上项目，51875129，镁/钛异种金属激光熔钎焊界面复合过渡层调控与反应机理，第一参与者；
07. 国家自然科学基金面上项目，51875130，增强相原位反应对碳纤维复合材料润湿及其与金属钎焊的影响机理，第一参与者；
08. 博士后基金项目，2018M641822，CoFeCrNiSiB高熵非晶覆层激光成形机理及高温磨损行为，主持；
09. 先进焊接与连接国家重点实验室开放课题，AWJ-20-M05，Co-Fe基合金非晶激光熔覆层高温磨损环境下的跨尺度损伤行为，主持；
10. 浙江省激光加工机器人重点实验室开放课题，lzsy-03，激光熔覆制备CoCrFeNiSiB非晶覆层及组织性能研究，主持；
11. 北京农业职业学院-哈工大（威海）联合课题，ITFAHMZ001923，Ni/Cu梯度覆层专用材料及覆层制备技术与性能研究，主持；
12. 哈尔滨工业大学科研创新基金，IDGA18102104，船舶用厚板Al-Zn-Mg系合金单面窄间隙焊接技术与接头性能研究，主持。
论著一览
01. Fengyuan Shu, Sicheng Niu, Baohua Zhu, Laijun Wu, Hongbo Xia, Bo Chen, Junming Zhao, Caiwang Tan. Influence of scan line spacing on nanosecond pulse laser welding of 6063 Al to steel thin sheets[J]. Optics & Laser Technology, 2022, 145: 107497.
02. 舒凤远, 牛司成, 何鹏, 隋少华, 张小东. 高熵非晶材料及其增材制造技术研究进展[J]. 焊接学报, 2021.
03. Bin Liu, Jiming Li, Shiyun Dong, Fengyuan Shu. Correction for Microstructure Effect on Residual Stress Measurement of SR-FSW Joint with L-cr Wave[J]. Russian Journal of Nonstructive Testing, 2020, 56(2): 131-140.
04. Fengyuan Shu, Biao Yang, Shiyun Dong, Hongyun Zhao, Binshi Xu, Fujia Xu, Bin Liu, Peng He, Jicai Feng. Effects of Fe-to-Co ratio on microstructure and mechanical properties of laser cladded FeCoCrBNiSi high-entropy alloy coatings[J]. Applied Surface Science, 2018, 450: 538-544.
05. Chengyue Ma, Li Zhou, Renxiao Zhang, DG Li, Fengyuan Shu, Xiaoguo Song, Yunqiang Zhao. Enhancement in mechanical properties and corrosion resistance of 2507 duplex stainless steel via friction stir processing[J]. Journal of Materials Research and Technology, 2020, 9(4): 8296-8305. (Corresponding author)
06. Fengyuan Shu, Sicheng Niu, Baohua Zhu, Laijun Wu, Hongbo Xia, Bo Chen, Junming Zhao, Caiwang Tan. Effect of pulse frequency on the nanosecond pulsed laser welded Al/steel lapped joint[J]. Optics & Laser Technology, 2021, 143: 107355.
07. Fengyuan Shu, Binglin Zhang, Tao Liu, Shaohua Sui, Yuxin Liu, Peng He, Bin Liu, Binshi Xu. Effects of laser power on microstructure and properties of laser cladded CoCrBFeNiSi high-entropy alloy amorphous coatings[J]. Surface and Coatings Technology, 2019, 38: 667-675.
08. Fengyuan Shu, Shuo Liu, Hongyun Zhao, Wenxiong He, Shaohua Sui, Jian Zhang, Peng He, Binshi Xu. Structure and high-temperature property of amorphous composite coating synthesized by laser cladding FeCrCoNiSiB high-entropy alloy powder[J]. Journal of Alloys and Compounds, 2018, 731:662-666.
09. Fengyuan Shu, Bin Wang, Hongyun Zhao, Caiwang Tang, Jialiang Zhou, Jian Zhang. Effects of line energy on microstructure and mechanical properties of CoCrFeNiBSi high-entropy alloy laser cladding coatings[J]. Journal of Thermal Spray Technology, 2020, 29(4): 789-797.
10. Fengyuan Shu, Lei Wu, Hongyun Zhao, Shaohua Sui, Li Zhou, Jian Zhang, Wenxiong He, Peng He, Binshi Xu. Microstructure and high-temperature wear mechanism of laser cladded CoCrBFeNiSi high-entropy alloy amorphous coating[J]. Materials Letters, 2018, 211:235-238.
11. Jialiang Zhou, Fengyuan Shu, Hongyun Zhao, Yaohui Lv, Yuxin Liu, Peng He. Microstructure and mechanical properties of heat affected zone in multi-pass GMA welded Al−Zn−Mg−Cu alloy[J]. Transactions of Nonferrous Metals Society of China, 2019, 29: 2273-2280.
12. Gaohui Li, Li Zhou, Fengyuan Shu, Yucun Liu. Statistical and metallurgical analysis of dissimilar friction stir spot welded aluminum/copper metals[J]. Journal of Materials Engineering and Performance, 2020, 29: 1830–1840. (Corresponding author)
13. Jian Zhao, Qingwei Gao, Houqin Wang, Fengyuan Shu, Hongyun Zhao, Wenxiong He, Zhishui Yu. Microstructure and mechanical properties of Co-based alloy coatings fabricated by laser cladding and plasma arc spray welding[J]. Journal of Alloys and Compounds, 2019, 785: 846-854. (Corresponding author)
14. Qingwei Gao, Fengyuan Shu, Peng He, Wenbo Du. Microstructure and impact mechanical properties of thick Al−Zn−Mg alloys plate multi-layer and multi-pass TIG welded joints[J]. Transactions of Nonferrous Metals Society of China, 2019, 29: 2496-2505. (Corresponding author)
15. Fengyuan Shu, Ye Tian, Jialiang Zhou, Wenxiong He, Hongyun Zhao, Binshi Xu. Microstructure and mechanical properties of two-layer laser cladded Co-based coatings[J]. Journal of Thermal Spray Technology, 2019, 28(6): 1330-1338.
16. Fengyuan Shu, Lei Wu, Yuxin Liu. Yaohui Lv, Ting Wang, Gang Chen, Fujia Xu, Binshi Xu. Numerical simulation of residual stresses in multipass gas metal arc-welded joints of thick aluminum alloy plates[J]. Journal of Materials Engineering and Performance, 2019, 28(6): 3361–3371.
17. Qiuyue Jiang, Ye Tian, Fengyuan Shu, Hongyun Zhao, Yiming Sun, Wenxiong He, Binshi Xu. Strengthening Mechanism and Properties of Co-WC Composite Coatings Deposited by plasma-transferred arc welding[J]. Micro & Nano Letters, 2019, 14(7): 717-720. (Corresponding author)
18. Fengyuan Shu, Ye Tian, Hongyun Zhao, Shaohua Sui, Yuxin Liu, Peng He, Binshi Xu. Microstructure and mechanical properties of multi-pass TIG welded joint of thick Al-Zn-Mg alloy plate[J]. Materials Research Express, 2019, 6, 1065e1.
19. Fengyuan Shu, Ye Tian, Sansheng Jiang, Shaohua Sui, Xin Zhang, Hongyun Zhao. Effect of rare earth oxide CeO2 on microstructure and surface properties of laser cladded CoFeCrNiSiB high-entropy alloy coatings[J]. Materials Research Express, 2019, 6, 106517.
20. Suqiang Zhang, Hongyun Zhao, Fengyuan Shu, Guodong Wang, Bin Liu, Binshi Xu. Study on the corrosion behavior of steel Q315NS heat-affected zone in a HCl solution using electrochemical noise[J]. RSC Advances, 2018, 8(1): 454-463. (Corresponding author)
21. 徐艳阳，舒凤远. 电气焊接工艺[M]. 北京：中国原子能出版社，2020.9.
国家发明专利情况
01. 吕耀辉，徐滨士，刘玉欣，舒凤远，通用多工位冷却式发动机气门焊接修复工装，申请日：2011.12.28，专利号：ZL201110448059.3
02.吕耀辉，刘玉欣，徐富家，舒凤远，徐滨士，一种等离子熔覆系统，申请日：2012.11.09，专利号：ZL201210448338.4
03.吕耀辉，徐滨士，刘玉欣，徐富家，舒凤远，一种焊枪定位系统，申请日：20120.11.08，专利号：ZL201210444598.4
04.贺文雄，李思昊，舒凤远，赵洪运，于静泊，杨海峰，一种火焰/等离子切割方法及装置，授权日：2021.07.27，专利号：201810821500.X
05.舒凤远，赵国臣，檀财旺，邰湾，贺文雄，赵洪运，初冠南，一种激光熔覆用高熵合金粉末及覆层制备方法，申请日：2020.08.04，专利号：ZL.202010770465.0